Pontiac Convertible Tops and Convertible Top Parts

Installation Packages:

Accessories Available:

Pontiac Convertible Tops: Can I Install Myself?

If you can use an air compressor driven staple gun, and are patient and methodical, you are very likely to be able to install any of these convertible tops. The convertible top packages include everything needed in most cases. (Convertible top frame seals must be ordered separately if required.)

Note that there is no sewing involved in installing a two part convertible top. There is stapling and there is manipulation of the top fabric which in places is applied with contact cement. Our convertible top packages include stainless steel staples and the very best grade of contact cement with brush. Please click the link to your convertible top page for more information.

Convertible Top Parts:

Also offered are the convertible top hold down cables, top frame tacking strips, well liners and other convertible parts. The Pontiac top restoration packages that we list include the parts usually needed in the replacement of your soft top.

Hydraulics:

We now stock hydraulic cylinders, motor-pumps, and hoses for your convertible tops. All are made to OEM specifications. Each can be ordered separately; however, when ordering hydraulic cylinders we recommend replacing both. The chances are that both hydraulic cylinders were manufactured at the same time: if one is on its way out the other may follow. If the top is raised and one hydraulic cylinder is working harder than the other the result over time can lead to a slightly bent convertible top frame. The replacement of both hydraulic cylinders will ensure that the top raises and lowers symmetrically.

Systems for this car take Automatic Transmission Fluid (ATF) and have a 5 year warranty when used with this fluid. Brake fluid should not be used as it voids the warranty. We also offer an installation manual when ordered.

The 12 volt motor-pumps include a mounting bracket with rubber grommets to reduce vibration.